Our website uses cookies. By continuing to browse our site you are agreeing to our Cookie Policy.
Back To Top
Roxar™ Subsea Sand Monitors (Obsolete)
roxar subsea sand monitors
This product is now obsolete.
Relevant documents and drawings are listed below.
Contact your local Emerson representative for your measurement needs.
Roxar™ Subsea Sand Monitors (Obsolete)

Specs

Accuracy
Up to 95% depending on flow regimes and calibration level
Repeatability
Better than 1%
Flow velocity
Minimum 1 m/s
Particle detection limit
In liquid: Greater than 25 µm depending on factors such as flow rate and viscosity
In gas: Greater than 15 µm depending on factors such as flow rate and viscosity
Pipe Surface Temperature
-40 °F to 437 °F (-40 °C to 225 °C)
Ambient Temperature Range
0 °F to 158 °F (-18 °C to 70 °C)
Material sensor body
UNS S31803 Duplex
Output
4-20mA, ModBus RS-485, CANbus SIIS Level 2
Electrical Interface
4/ 7/ 12 way
Water Depth
10000 ft (3000 m)

Features

  • Acoustic based sensor provides an immediate response to the onset of sand production.
  • Compact, robust design provides easy installation and retrieval on the outside of the subsea production pipe-work.
  • ROV retrievable and Non-retrievable models are available, both mounted in fixed pre-installed clamps with guide funnels.
  • Can be used with Roxar Sand Erosion Sensors to positively confirm the occurrence and severity of a sand event, giving operators complete control over sand production.
  • Connect to Roxar Fieldwatch monitoring software for in-depth analysis and investigation of process changes.