This product is now obsolete.
Relevant documents and drawings are listed below.
Contact your local Emerson representative for your measurement needs.
Contact your local Emerson representative for your measurement needs.
Our website uses cookies. By continuing to browse our site you are agreeing to our Cookie Policy.
Rosemount™ OPM3000 Opacity Dust Density Monitor (Obsolete)
Rosemount™ OPM3000 Opacity Dust Density Monitor (Obsolete)
Specs
Enclosure Rating
Panel mounted IP65/NEMA4X Dimensions 96 x 96 x 64 mm (3.8x3.8"x2.5"). Power 20.4 to 28.8 VDC < 10 % ripple
400 mA."
Certifications/Approvals
CE and UL Listed
Mounting
Resources
Features
- USEPA ASTM D 6216 and 40 CFR 60 PS-1 grade optics
- Alignment viewing port enables the operator to visually check system alignment at anytime during operation
- Dual beam measurement assures high sensitivity, freedom from errors due to vibration or minor misalignment
- Insensitive to ambient light
- The solid-state light modulation system eliminates possible interference due to ambient light
- Automatic lamp aging compensation
- All measurements are made on a ratio basis and are independent of the absolute intensity of the light source
- Three user selectable displays
- Optional SD Card for program backup and changes
- Communications via MODBUS RS485 or 4–20mA output
- CE and (C)UL Listed
- Password protected settings